Twist Hubs for 3mm shafts (One Pair)
$20.51
Description
– Use Twist Hubs to easily and securely mount our FingerTech Foam Wheels. Foam wheels are the preferred choice for combat robots because they absorb impacts and save your drive motor gearboxes.
– Upgraded lengthwise fins ensure the tire cannot spin on the hub even if the tire isn’t compressed by the washer.
– Available in two widths; 0.50in (thin) and 0.75in (wide)
Specifications:
– Anodized 6061 aluminum for high strength and low weight.
– The foam tire is held tightly by a custom locking washer, which must be pressed in and turned 90 degrees to release.
– The hex flange will allow you to keep driving even if the locking washer is destroyed.
– The hub is secured to the motor shaft by a strong 8-32 setscrew.
– Available with 3mm, 4mm, and 6mm shaft bore, but can be drilled out as big as 6.35mm (0.25in).
– Weight: Thin size (0.50in wide) weighs 5.6g each. Wide size (0.75in wide) weighs 7.1g each.
– The foam tire is held tightly by a custom locking washer, which must be pressed in and turned 90 degrees to release. See installation video below.
Requires:
– 5/64in hex wrench
– Foam wheels (FingerTech Foam Wheels, or hobby store Lite Flites / Lectra Lites)
– FingerTech Twist Hub Key or needle nosed pliers
Additional information
Width | Thin (0.5"), Wide (0.75") |
---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.