Description

See more information on Turnabots website here

Price is for 1 (one) motor.

Some brushed motor basics:

Torque and stall current have a near linear relationship. Cheap N20s are very weak and have appropriately low stall currents. For comparison on 2S:

Cheap N20 motors (often as low as $4 each) often stall near 0.25 amps and are working hard to move 150g and generally cannot push another 150g around.

Decent N20 motors (usually in the $7-$9 range) often stall near 0.45 amps and while they’ll move themselves around fairly well, they are not likely to win many pushing matches.

“Good” N20 motors (usually in the $10-$14 range) generally stall closer to 0.90 amps and have real “authority” with 150g bots and are occasionally used in 1lb bots.

Before we had the latest batch of Turnabot N20 motors made the “best” N20s we were aware of were rated at 1.60 amps and were appropriately $18+

Turnabot “Monster” N20 motors now stall at an incredible 2.0+ amps on 2S. It is VERY hard to stall these in insect weight drive so using one of them per side on 2.0 amp ESCs should be okay. These are NOT rated to run two of them per side on a 2.0 amp ESC.

Please note that even the 3600rpm N10 motors have enough torque that with four of the stickiest tires we’re aware of, a 2S lipo at it’s minimum suggested voltage (7.4v), and while carrying another 150g bot (300g on the wheels) these will still spin all four tires. The lower rpm motors can spin four sticky tires even in 1lb bots.

This much power in this small of a package means these motors should NOT be stalled for any length of time.