Description

Motor Specifications:
– FT1806 Custom-wound High Performance Brushless Outrunner
– KV: 2230KV
– Rated Voltage: 20V (happy on 2-4S lipoly)
– Rated Current: 10A.
– Motor Resistance: 0.15ohm
– Max Current @12V: 10A
– Stall Torque: Notes about Brushless Motor Torque
– No-Load Current (with Mega Spark gearbox): 1.1A
– Recommended ESC: BL20A-R Reversing Brushless ESC
– Shaft Diameter: 2mm (0.078in)
– Shaft Length: 9.6mm (0.38in)
– Weight: 25.9g (0.91oz)
– Diameter: 23.1mm (0.91in) (slightly smaller than a 24mm gearbox, so it won’t rub on a sidewall if flush mounted)
– Length (back to face): 18.5mm (0.73in)
– Motor Wires: 10cm long 26AWG with 3.5mm bullet connectors
– If you require a new pinion gear to match the Mega Spark planetary gearbox, they are here: (11T Pinion) (One pinion comes with the gearbox if you are buying that already.)

Max Power Point:
– Voltage (12V nominal): 11.92V
– Current: 10.3A
– Efficiency: 58.68%
– Torque: 0.0337N.m
– Power: 72W
– Speed: 20360.5rpm

Mounting Holes:
– Two M2-0.40 holes spaced 16mm (0.63in), two M2-0.40 spaced 12mm (0.47in), 90degrees offset.
– The rotating portion of the motor has four M2-0.40 screw holes spaced evenly on a 9mm circle.
Wiring: Connect the three ESC wires any way you like. If the motor is spinning backwards, swap any two wires.