Description

– This 40A brushless speed controller will let you GO BIG with your next beetle-weight robot.
– These ESCs operate on new AM32 firmware, which is more efficient than BLHeli and has better spin-up routines giving you maximum power!

Specifications:
Operates on AM32 software
Voltage: 11.1V – 22.2V (3S-6S lipoly)
Current: 40A continuous, 45A burst (<10 seconds)

Size: 37 x 12.4 x 6.5mm (1.5 x 0.49 x 0.26in).
Weight: 12.1grams (0.43oz)
Motor wires: 3.5mm female bullet connectors, 8cm (3.15in) wire length.

Note:
– No on-board BEC. Must provide 5V to radio receiver via other ESCs or separate dedicated BEC.
– Wiring: Connect the three motor wires any way you like. If the motor is spinning backwards, swap any two wires.